Monday, November 23, 2026

Transceiver Control Interface (TCI) an idea who's time has come

TCI is a network alternative to the proprietary serial protocols for controlling transceivers. Defined by ExpertSDR. 

"TCI (Transceiver Control Interface) is a network interface for control, data transfer and synchronization between transceiver/receiver, contest loggers, digital mode software, skimmers and other software, as well as external power amplifiers, bandpass filter units, antenna switches, radio controllers and other devices.

TCI was created as a modern alternative to the outdated COM port and audio cable interfaces, it uses a full duplex web socket protocol that runs on top of a TCP connection and serves for server-client communications, providing cross-platform connectivity. Transceiver works as a server, all other software and devices as clients. The server and clients can be inside the same computer (program-server, hardware log, etc.-clients) and/or in separate physical devices connected through the local network (classical transceiver, power amplifier, antenna switch, FFT unit, etc.).

The TCI interface contains basic transceiver control commands (analog of CAT system), receives CW macros from clients and broadcasts them, outputs transceiver IQ stream to clients, receives spots from skimmers and Internet clusters, receives/outputs audio signal to work in digital modes."

I first heard about it from John VK3JCO who asked me to add it to FreeDVNeo so he could link it to his Flex software. 

Along with rig control commands TCI also supports transmission of IQ streams and, most importantly, audio signals which frees the user from needing to create virtual audio cables to connect an SDR to apps like WSJT-X. (WSJT-X supports TCI).

A server listens on a port, the default is 40001, and clients connect either locally or if you allow it, remotely.

I've built TCI client support in to FreeDVNeo:


I've built a TCI server into HermesNeo (a client for the Hermes Lite 2).

Also TCI server is now in Icom-Control which provides a nice gateway between Icom radios and the TCI world.



The good folks who work on HamLib have done a great job over many years but rig control over serial tends to be a pain point in using transceivers from computers. 

OpenX6X00 software for the Xiegu radios has TCI built right in. I hope one day the manufacturers, Icom, Yaesu, etc will join the movement.

No comments: