sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 862549F9 sudo nano /etc/apt/sources.list
Add the following to the end of the sources.list file:
deb http://ppa.launchpad.net/ki7mt/wsjtx-next/ubuntu trusty main
Ctrl-X to save and exit.
sudo apt-get update # important sudo apt-get install wsjtx
Then just run from the command line the first time to see any errors, after that run it from the Ham Radio applications menu.
I'm running a SignaLink USB interface and controlling an FT-817 via Hamlib. It correctly found the audio interface on first run.
Here it is sitting on top of the PC tower it has replaced.
4 comments:
Nice article, it inspired me to try once again and was able to get the RPI-3 working. Thanks
de nc7u
Do you have any information about sound card usage?
Seems to work ok on a RPi 3 but how do you change the sub modes in JT4 ?
Cheers John
You write
I'm running a SignaLink USB interface and controlling an FT-817 via Hamlib. It correctly found the audio interface on first run.
I am trying to link my Rasperry Pi3B with WSJTX running well with the Signallink USB. I can receive data (JT65), but the Pi3 will not transmit data via the Signalink so that it can get to my TS450 (Kennwoord).
How did you identify the proper Input and Output data to select in the WSJTX Menu that will do the trick?
73, Klaus
DL2QB
Post a Comment