Saturday, May 31, 2014

Australian broadband needs upload speed too

I'm in San Francisco this week for the Apple WWDC. The flat I'm sharing has apparently typical broadband. It certainly seems very snappy for downloads but what absolutely kills me when I compare what we have in Australia is the upload speed.

This is over Wifi by the way. At home on Telstra I get 100Mbps down but around 2Mbps up. This makes sending files or backing up to the cloud very difficult. Will the NBN fix this?

I asked the other residents of the unit if their internet connection was typical, amusingly they took this as a complaint and apologised for the poor speeds and asked if I was having trouble. They expect to get 100 down and 50 up. There is no download limit. They pay $400 a year.


I'm currently in San Francisco at the Apple developer's conference and here we have the fastest internet I've experienced so far.

This is not some science fiction future world, this is today.

Thursday, May 29, 2014

Noise in flats

This appeared in the lift last week.

Most interesting. I'll have to avoid raucous laughter and talking over other people.

Monday, May 26, 2014

Apple ARM laptops - not what you think

There have been rumours for years that Apple is working on ARM based computers with keyboards, after all the phones and tablets are already ARM processors. Recent rumours, talk about MacOS X, but Google's success with Chromebooks for education suggests another alternative.

I think Apple might make a low cost laptop running a version of iOS that would be perfect for users who want the simplicity and security of iOS, combined with lower cost and long battery life from an ARM processor. It would be popular with eduction but also the huge audience of users who find full operating systems confusing.

This laptop would have a keyboard and a large trackpad. My guess is that they would not do a touch screen as poking the screen on a laptop is not a good experience.

The whole idea is a reprise of a past product, the eMate, which was a laptop version of the ill fated but much loved Newton. The App eco-system would provide a rich set of applications that would need a little tweaking but port over quickly. Many apps already work well with external keyboards. Without touch presumably a "mouse" cursor would be needed but not much else.

Friday, May 23, 2014

First look at the Intel Galileo embedded linux board

I've just received an Intel Galileo board and am starting getting to know it. In the past I've used Arduinos for low level hardware "bit bang" style projects, and Raspberry Pi or Beagleboards where a little embedded Linux is needed - both are great for their purpose.

The Intel Galileo is kind of a mash up between the two worlds, underneath it runs Linux and it has software that emulates the Arduino's hardware enough for many sketches to run as they are.

You can see that it includes the standard, weirdly offset, Arduino sockets for taking "shield" boards.

The board is just 7x10cm and pretty capable:

  • USB 2 client and USB 2 host ports.
  • Serial port (wired to a convenient 3.5mm stereo socket)
  • Ethernet socket
  • Standard 5V 2.1mm power socket
  • Mini PCI Express slot with USB 2.0 Host support - this is probably most useful for adding a Wifi card.
  • All of the Arduino's analog and digital I/O ports.
  • It has the normal pin 13 LED that you get on an Arduino.
  • The CPU is an Intel Quark SoC X1000, which is a 32 bit Pentium class processor running at 400Mhz. (Single core).
  • 256MB of RAM
  • 8GB onboard flash which contains the linux boot
  • uSD card slot that can take up to 32GB cards and will boot from this if present.

As an Arduino

First up I wanted to try it as an Arduino emulator. I connected a microUSB cable from my Mac to the USB client port on the board.

The version of the Arduino development tool which has been modified for the Galileo can be downloaded from Intel's download centre. Annoyingly it's also called Arduino, so will collide with the normal Arduino app unless you rename one of them. (I read that spaces in the name are a bad thing by the way).

Choose the virtual serial port and choose "Firmware update" from the Help menu.

The update was faster than the 5 minutes they warned about. After the update I had to quit and re-launch the Arduino environment.

I selected the Blink example from the sample sketches bundled with the environment, clicked compile and then run. 

Now we see a little blinking green LED on the board, just like a real Arduino.

But this seems a waste of a Pentium CPU with a quarter of a Gig of RAM!

Talking to Linux

Sketches can fire off linux commands using a system() function.

I plugged a short ethernet cable from the port on the back of my Mac directly in to the ethernet port on the board. (Macs don't need crossover cables). To bring up the interface on linux you need to write a sketch to configure the interface and start the telnet server.

system("telnetd -l /bin/sh");
system("ifconfig eth0 netmask up”);

With ifconfig on my Mac I can see that en0 gave it self

I ran the sketch.

And I can telnet to the board:

$ telnet
Connected to
Escape character is '^]'.

Poky 9.0.2 (Yocto Project 1.4 Reference Distro) 1.4.2 clanton

/ # top
Mem: 22704K used, 215448K free, 0K shrd, 0K buff, 12972K cached
CPU:  99% usr   0% sys   0% nic   0% idle   0% io   0% irq   0% sirq
Load average: 0.98 0.56 0.26 2/36 3476
 3468   875 root     R    10100   4%  99% /sketch/sketch.elf /dev/pts/1 /dev/ttyS0
 3476  3475 root     R     1268   1%   1% top
  951     1 root     S     1268   1%   0% telnetd -l /bin/sh
  197     2 root     SW       0   0%   0% [kworker/0:1]
  870     1 root     S     1272   1%   0% {} /bin/sh /opt/cln/galileo/
 3475   951 root     S     1268   1%   0% /bin/sh
  720     1 root     S     1264   1%   0% /sbin/syslogd -n -O /var/log/messages
  884     1 root     S     1264   1%   0% /sbin/getty 38400 tty1
  883     1 root     S     1264   1%   0% /sbin/getty 115200 ttyS1
  724     1 root     S     1260   1%   0% /sbin/klogd -n
  875   870 root     S      876   0%   0% /opt/cln/galileo/clloader --escape --binary --zmodem -
    1     0 root     S      796   0%   0% init [5]
  873     1 root     S      768   0%   0% /opt/cln/galileo/galileo_sketch_reset
    3     2 root     SW       0   0%   0% [ksoftirqd/0]

Interesting, I guess the Arduino software loader uses zmodem, that takes me back to the old dial up BBS days!

There’s a /sketch directory containing sketch.elf which is the binary of the sketch I’m running.

The little Yocto Linux distribution in the 8GB of onboard flash is pretty basic and doesn't have ssh for example so it's time to upgrade.

Boot Linux from uSD Card

There's a larger Linux distribution from the Intel download centre

I found a spare uSD card, stuck it in an SD adapter and stuck it in to my Mac, a USB reader would do.

Using Disk Utility, partition the uSD card as MSDOS FAT single partition. I called mine BOOT.

The Linux image is compressed with 7zip. I think I have that from Homebrew so you might need to find something else to uncompress the file if you don't have that.

I extracted directly to the root of the uSD card like this:

$ 7z x LINUX_IMAGE_FOR_SD_Intel_Galileo_v1.0.0.7z -o/Volumes/BOOT

Unmount the uSD card. Power off the Galileo board, insert the uSD card and power up. Lights flash enthusiastically for a little while.

To find the IP address the board has taken I use arp on the Mac:

$ arp -i en0 -a
? ( at 98:4f:ee:1:45:c0 on en0 [ethernet]
? ( at ff:ff:ff:ff:ff:ff on en0 [ethernet]

So we can see it’s on

$ ssh root@
The authenticity of host ' (' can't be established.
RSA key fingerprint is 09:ff:22:6c:5b:1f:7b:39:53:a2:a7:6d:d4:d7:fe:54.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '' (RSA) to the list of known hosts.

And we’re in. (No root password). I’m using an old 8GB uSD card and that leaves me with 140MB free. You can use up to 32GB cards.

I can see the on board 8GB there so presumably that could be wiped and used as a drive if you’re booting from the uSD card.

# df -h
Filesystem                Size      Used Available Use% Mounted on
rootfs                  295.1M    139.5M    140.6M  50% /
none                    115.3M      4.0K    115.3M   0% /dev
/dev/mmcblk0p1            7.2G    306.4M      6.9G   4% /media/realroot
/dev/loop0              295.1M    139.5M    140.6M  50% /
/dev/mmcblk0p1            7.2G    306.4M      6.9G   4% /media/mmcblk0p1
tmpfs                   116.3M    116.0K    116.1M   0% /var/volatile
tmpfs                   116.3M         0    116.3M   0% /media/ram

There's lots of standard utilities, sshd, python and node are there so it’s a very familiar environment. Plus there’s the Arduino emulation software as well.


At around $110 plus shipping the Intel Galileo makes an expensive Arduino, but as an x86 Linux board it seems like a bargain. (It comes with a beefy 3A 5V power supply which explains part of the price).

I'm keen to see the things that this extra processing power can handle that a Raspberry Pi would not be able to cope with, things like FFT processing for real time signal processing. (I'm looking at you FreeDV...).

I realise the on board space is short but it might be nice if the network port was able to join a network and at least listen for telnet without the need for a sketch or uSD card boot to get to Linux. Presumably they want users to at least try the Arduino emulation side of the product.

My sincere thanks to Intel Australia for early access to the board.

Great videos from Dave, VK3ASE

Dave, VK3ASE, is a prolific video maker. Recently the quality of his work is extremely good. For a taste, check out this story about a Gibson Girl SCR 578 life boat radio he found washed ashore in Melbourne.

I love the music.