Monday, November 16, 2026

SolidCraft software for 3D print designs

The suite of ArtCraft software is amazing. Very good clones of popular software including the Microsoft and Adobe suite but also SolidCraft which seems to be "inspired" by AutoDesk Fusion 360. It's a parametric 3D CAD package that I'm slowly getting my head around.

I recently purchased an OrangePi Zero and wanted to make a box for it.


Here's the result:


The trick is to measure all the key things and put those measurements in variables that are then used for dimensions in the design. Things like wallthickness are used all over the place and a single change ripples through the design.

I'm not yet completely compitent but am getting things done after a few days.

AI has led to a flood of new low cost software which is pretty good. AutoDesk wants A$83/month (paid annually) and from what I can tell, SolidCraft does what I need for $zero.

I forsee a challenging time ahead for software vendors.

Sunday, November 08, 2026

End Fed Half Wave for the "house" antenna

The radio shack is away from the house which helps it to have fantastic low noise reception. During winter, it' gets cold out there in the metal shed so I've ended up running a cable through the wall of the main house so I can have a transceiver next to my computer. The antenna has been a 40m dipole. It works OK but not as good reception as the shack antennas. I thought it might be fun to have multiple bands so strung out a half wave cut for 80m and above. Here's the sweep done with NanoVNASaver:


The shaded areas are the ham bands so it's perfect at 80m but a little off with some of the other bands. I'm currently using the Xiegu X6200 with Open 6200 software so it has a tuner built-in.

Over night I ran frequency hopping WSPR and 40m is still my best band.


WSPR (and friends) are amazing.


Image from WSPR Watch.

Thursday, November 05, 2026

JTTY Sydney - Melbourne 1W each way.

Stephen, VK2BLQ, and I have been chatting with JTTY between Melbourne and Sydney. It's before 3pm in the afternoon and we can reduce power to 1W and have perfect copy.

This is a new mode in WSJTX. I've Claude coded a simple app for Linux and another version for macOS. Stephen's using the Linux flavour and I'm using the macOS spin.

Works well and a nice way to chat.

From the WSJTX user guide:

"JTTY is an entirely new digital mode designed for fast RTTY-like contest exchanges and other keyboard-to-keyboard communication. Its operational feel is similar to standard RTTY, but it has much better weak-signal performance and far lower error rate. JTTY transmissions can start at any time and typically last a few seconds. Error-free throughput is about 30 words per minute for arbitrary text and 60 WPM for the short, fixed-format messages generally used in RTTY-style contesting."

We are just using the "arbitary text" mode.

Wednesday, November 04, 2026

Tech Talk on ABC Radio - Apple reverses view on touch screen laptops

Apple appears to have had a change of heart, embracing touchscreen technology in its latest high-end MacBook – something Steve Jobs once famously argued against. 

Also, a look at a staggering cryptocurrency theft involving billions of dollars, and a major security vulnerability that has put millions of websites at risk. 

Peter Marks, software developer and technology commentator from Access Informatics, joined Philip Clark and listeners to Nightlife with the latest tech news and information. 


 https://www.abc.net.au/listen/programs/nightlife/nightlife-tech-talk-with-peter-marks/107342826 

Sunday, November 01, 2026

Harvesting ESP8266 from old smart plugs

I've been upgrading all my smart plugs to Matter compatible devices which are much easier to set up and manage in a single app. As a result I have a box of older devices each of which needs a different app.


This one opened up easily with some standard screws. The ESP8266 chip is on a little board that was easy to remove.


The two pins in the top right of the image above are serial TX and RX. The two pins on the bottom right are 3.3V and GND on the right edge.

On the back is an 8 Mbit memory chip giving 1MB of storage.


The pin marked 0 is GPIO 0 used to get to boot mode. G is ground.

I did a google image search of the front and found this helpful site describing the pins.

I used a USB serial board set to 3.3V and hooked Tx and Rx lines as well as +V and Ground.

This board also exposes GPIO4, 5 & 12 which could be handy.

To put the chip into boot mode you connect the GPIO 0 pin (simply labelled 0) to ground and plug in the power - in the form of the USB serial device.


ls /dev/tty.* to find the serial device. ESPTool was able to confirm the size of the flash memory.

esptool --port /dev/tty.usbserial-A50285BI flash-id

esptool v5.6.0

Connected to ESP8266 on /dev/tty.usbserial-A50285BI:

Chip type:          ESP8266EX

Features:           Wi-Fi, 160MHz

Crystal frequency:  26MHz

MAC:                cc:50:e3:67:04:66


Stub flasher running.


Flash Memory Information:

=========================

Manufacturer: 85

Device: 6014

Detected flash size: 1MB


Hard resetting via RTS pin...

I downloaded the 1MB version of Micropython. And flashed it to the chip.

esptool --port /dev/tty.usbserial-A50285BI --baud 460800 write-flash --flash-size=detect 0  ESP8266_GENERIC-FLASH_1M-20260824-v1.29.0.bin

Unplugging, remove the link from GPIO 0 to ground and re-connect to USB serial.

I used putty to talk to the serial device at 115200 and up came the python REPL.

Not sure what I'll do with these microcontrollers but it's better than putting them in the bin. Mains smartplugs also have some other useful bits including a relay that might be worth harvesting. 

Update: Here's a couple of other boards harvested from smart plugs.


Above is an ESP8285.



This one looks like a Tuya Smart (utilizing the Beken BK7231T ARM Cortex-M4 wireless SoC).

I removed the metal shield to reveal an RTL8720CF.


It looks like there are tools around to program these with a serial interface.

Flying saucer end fed half wave antenna

A big fan of end fed half wave antennas, particularly for portable use. Purchased a Flying saucers antenna from AliExpress for AU$56 and tried it out today.

The case is a clever design, easy to draw out the wire and easy to wind back in with an index finger.

I ran a rope over a tree branch using a drone and pulled the end up to test.

The wire it came with was a bit long - certainly that's better than it being too short - so I had a few down and up cycles to bring it up to the 40m band.


The unit has an SO-239 in the centre which is convenient. The toroid is burried inside the middle of the winder and when the wire it all out I can see that it is very small. They claim 25W SSB but I'd hesitate to run more than 10W in to this little thing. After shortening the wire a bit it gives a good match on 40 and related bands above.


Reasonable value for the money considering you get an Unun, winder, wire and socket. I've made many ununs myself but the wire winding is always the most annoying thing and this kind of winder prevents twisting the wire.


Diversity reception of FreeDV RADE

On Sundays from 9:30am local time I conduct a FreeDV RADE net on 7177kHz or similar. There are stations from VK3 (local to me), VK2, VK5 and sometimes VK7. Recently conditions have been such that local stations can't hear each other but remote stations have a good signal.

It's always been possible to pipe audio from a WebSDR in to apps like FreeDV to use a remote receiver but recently I added a feature in to my FreeDV implementation for macOS that lets me configure two receiver audio channels. A RADE modem runs on the second receiver and monitors SNR. 

The fact that the RADE decoder produces an SNR measurement makes it possible to easily compare two signals.

If the SNR of the other receiver is 3dB better for a few seconds the app switches to that input. Here it is in operation using RX2 (you'll need to click to enlarge).


The key bit is the status line which shows the currently used receiver in bold.


There's a bit of a bump when switching decoder pipelines but it works well enough. One weird thing is that my transmit signal is good to the remote SDR so I sometimes hear my last words and I do decode my EOO callsign frame.

The fatal flaw in this is that it's not much good running a net where I can hear people who can't hear me.

The one important piece of the puzzle is the audio routing. I use LoopBack for macOS I'm not sure how you'd do this on Linux or Windows but presumably there's ways.



Friday, October 30, 2026

macOS morse code decoder using machine learning - port of DeepCW

I've been eagerly awaiting someone clever to apply machine learning to decoding morse code and I just stumbled upon this excellent project by e04 called deep-cw-decoder.

As I'm inclinded to do, I asked my friend Claude to port it to Swift for macOS and this is the result:


It's the best morse decoder I've ever tried. Here's a video of it in action:


My port is freely available here and I've made a downloadable app for macOS 27 here. 

Monday, October 26, 2026

Amazing Open firmware for the Xiegu X6200

Icom radios are great but the firmware rarely gets updated. I've been making my own user interfaces by making software that talks to them but this morning I grabbed some amazing open firmware for my Xiegu X6200 from https://openx6x00.org


Amazing improvement over the stock Xiegu software. A great thing about this is it lives on a microSD card and if you remove the card the radio boots up as it was.

I joined the MRARC 80m net using the radio and got good reports running 10W when normally I run 100W. Just goes to show it's all about the antenna. Here's some bits of the net including another Xiegu station running a G1M that sounds excellent.


This video was made using the built-in screen recording feature. I then connected to the radio over it's built-in web server and downloaded the video files.

Friday, October 23, 2026

Icom-Control - a new macOS app to control some Icom radios over a network

On a bit of a roll here with SDR style user interfaces. I've been working on macOS 27 software to connect to some Icom radios. 


So far only tested on IC-705, IC-7760 and IC-7300 Mk2 (Thanks VK2AWN for the last one).

It works fine over ethernet and Wifi. There's also USB connection but, understandably, the spectrum display is much slower.

This software is still under development so there will be bugs. Check out the built-in help for more info.

Transmitting you'll need to go into Menu, Set, Connectors, MOD Input and set it to LAN (or USB).

More info, download link and updates here.

Feedback and bug reports most welcome.

Thursday, October 22, 2026

Joined our club net using a Hermes Lite 2

My local club, the Macedon Ranges Amateur Radio Club (MRARC), has a weekly net on 80m and this week I joined using a Hermes Lite 2 driven by my new macOS software HermesNeo. It was a very noisy night on the band due to storms but reports of my signal were good.


Richard, VK3LRJ, kindly loaned me a 100W Elecraft amplifier but I only get enough drive out of the Hermes to get about 40W out. That was clearly enough to be heard by everyone. Earlier in the afternoon I had contacts with ZL and VK7.

All of this software work is, of course, elaborate procrastonation to avoid working on home brew radio hardware.

Wednesday, October 21, 2026

Tech Talk on ABC - Can Microsoft turn this ship around?

Apple gave Windows a run for its money when it switched its Macs from Intel processors to its own Apple Silicon chips, delivering big gains in performance and battery life and leaving many PCs struggling to keep up. 

Microsoft is fighting back with new Nvidia processors, improvements to Windows 11 and a push to run AI directly on our computers. Can Windows finally close the gap? 

Peter Marks, software developer and technology commentator from Access Informatics, joined Philip Clark and listeners to Nightlife with the latest tech news and information. Listen here.

Incidentally, I note that Philip has been presenting Nightlife for ten years. There's a nice write-up here.

Monday, October 19, 2026

Bargain 5000mAh 21700 Li-ion battery

Heath, VK3TWO, spoke about Meshcore at the latest Macedon Ranges Amateur Radio club meeting and mentioned a low cost way to get extra batteries to charge solar powered devices. These Click brand USB-C phone powerbanks are $6.98 at Bunnings.


They are a bit hard to get in to. The top has strong clips and, I assume, glue. I used a Dremmel cutting wheel to reveal the contents. It's pretty much all battery. I've seen similar 21700 batteries for $37 on their own.


It looks like a proper charging circuit with a temperature sensor. One thing to watch for is that these were in a big bin near the service desk and one of the four I purchased turned out to have lightning output rather than USB-C - that's the one I cracked open.

The other great tip Heath had was for building solar powered Meshcore repeaters, by buying a decent solar powered garden light and replacing the light with your radio gear. The good ones have one or two 18650 batteries inside them. They are also designed to be left outside.


HermesNeo - macOS software for Hermes Lite 2

I've had a Hermes Lite 2 on the bench for some time but couldn't find SDR software that I liked. This is very early software so it's not ready for prime time but is working for me on the bench here. You'll note that FreeDV RADE is a first class mode in this application.


Here's an over the air test of FreeDV RADE 1 and 2. The audio you hear is what is decoded by FreeDVNeo connected to an X6200.

 


Note sure how common the Hermes Lite 2 is, and of those owners, how many have macOS. I believe other radios are somewhat compatable and I'd be interested to hear if any others just work - as they say.

More info and download link here.

Sunday, October 18, 2026

HackRF Transfer GUI for macOS

hackrf_transfer is a command line tool for getting a HackRF to capture and replay IQ files. I often use this for testing software such as FreeDV RADE and digital modes. Playing back a slab of a band full of SSB contacts is a great way to demonstrate receivers such as my Soldersmoke Direct Conversion receiver.

This GUI looks for hackrf_transfer which I install with homebrew but if you have the binary somewhere else you can choose it manually in settings.

The main window has two main parts. Capture and Transmit. Here's capture, showing the level monitor which is handy for setting the gain to an optimum point for recording.


It can also play back .c16 files captured in the field on a HackRF portapack.

I've put a page about the app with a download link here.

Saturday, October 17, 2026

JTTY Traffic increasing

I've been monitoring JTTY traffic on 40m. (As an aside, 7090 USB is a poor choice of frequency here in Australia as there's a lot of 7100 LSB activity here).

I'm just on a small dipole near the house but here's what I logged using my JttyChat app over night.

RX Hello this is A test from VK3TPM 2026-10-16 18:33:23 +10 dB

RX H%</A 2026-10-16 18:56:10 -15 dB

RX 1135 0110 2026-10-16 19:10:24 -16 dB

TX CQ DE VK3TPM 2026-10-16 20:22:08

RX CQ 2026-10-16 20:27:26 -13 dB

RX Avy QSL 2026-10-16 20:27:42 -10 dB

RX JW4MFL 2026-10-16 20:46:18 -16 dB

RX JTTY slice netw ... E N2A ... Eck ins please K## 2026-10-16 20:47:39 -8 dB

RX DE N2AVY web page HTTPS://MUSE.AI/S/THE-OUTER ... -SLICE-NETWORK-ZD6IB8ZGGX0V an 2026-10-16 20:48:05 -5 dB

RX ://MUSE.AI/S/TH ... Er-jtty-sl ... K-ZD6 ... GX0V 2026-10-16 20:48:39 -9 dB

RX CQ the outer JTTY slice network DE ...  N2AVY ... Ins pleas 2026-10-16 20:49:18 -5 dB

RX Net open N2AVY web page HTTPS://MUSE.AI/S/THE 2026-10-16 20:50:53 -8 dB

RX Net open N2AVY web page HTTPS://MUSE.AI/S/THE-OUTER-JTTY-SLICE-NETWORK-ZD6IB8ZGG 2026-10-16 20:53:23 -6 dB

RX CQ the outer JTTY slice N ... K DE N2AVY N2AVY check ins please K 2026-10-16 20:54:08 -6 dB

RX CQ CQ the outer JTTY slice network ...  Avy N2AVY check ins please K # 2026-10-16 20:55:44 -6 dB

RX All stations please standby for net control DE N2AVY K## 2026-10-16 20:56:24 -4 dB

RX DE N2AVY standing by ... Any S ... Eck in che ... Use netlogger and check 2026-10-16 20:56:58 -7 dB

RX CQ CQ the outer JTTY slice network DE N2AVY N2AVY check ... Please K # 2026-10-16 20:58:03 -6 dB

RX CQ CQ the outer JTTY slice network DE N2AVY N2AVY check ins please K # 2026-10-16 20:58:37 -6 dB

RX CQ CQ the outer JTTY slice network DE N2AVY N ... Check ... Please K # 2026-10-16 20:59:45 -6 dB

RX DE N2AVY the net controller for todays the outer RTTY slice network. 2026-10-16 21:00:18 -6 dB

RX The outer JTTY slice network DE N2AVY check ins please K# 2026-10-16 21:01:57 -6 dB

RX CQ the outer JTTY slice network DE N2AVY N2AVY ... Ins please K# 2026-10-16 21:02:27 -4 dB

RX The outer JTTY slice ... E N2AVY check ins please K 2026-10-16 21:03:52 -7 dB

RX Pen N2AVY web page HTTPS: ... E.AI/ ... -Outer-jtty-slice-ne ... -ZD6IB8ZGG 2026-10-16 21:04:33 -6 dB

RX DE N2AVY W ... Ge HTTPS://MUSE.AI/S/THE-OUTER-JTTY-SLICE-NETWORK- ... 8ZGGX 2026-10-16 21:05:04 -7 dB

RX The outer JTTY slice network DE N2AVY N2AVY ...  Ins please K 2026-10-16 21:05:56 -7 dB

RX JSN CQ DE ...  In check in K 2026-10-16 21:07:37 -6 dB

TX CQ DE VK3TPM 2026-10-16 21:08:23

RX Q DE N2AVY check in check in K# 2026-10-16 21:08:33 -7 dB

RX CQ tojsn CQ DE N2AVY check in check in K# 2026-10-16 21:08:58 -7 dB

RX Net open N2AVY web page HTTPS: ... E.AI/S/THE-OUTER-JTTY-SLICE-NETWORK-ZD6IB8ZGG 2026-10-16 21:09:23 -5 dB

RX DE N2AVY the net controller for tod ... He outer RTTY slice network. 2026-10-16 21:10:28 -6 dB

RX CQ N2AVY N2AVY CQ 2026-10-16 21:11:23 -7 dB

RX CQ N2AVY CQ 2026-10-16 21:11:39 -11 dB

RX CQ N2AVY CQ 2026-10-16 21:12:23 -8 dB

RX CQ N2AVY CQ 2026-10-16 21:12:33 -9 dB

RX DE N2AVY QSL 2026-10-16 21:12:57 -7 dB

RX CQ N2AVY CQ 2026-10-16 21:13:06 -8 dB

RX Net open N2AVY ...  Age HTTPS://MUSE.AI/S/THE-OUTER-JTTY-SLICE-NE ... -ZD6IB8ZGG 2026-10-16 21:13:29 -7 dB

RX SL 2026-10-16 21:14:10 -11 dB

RX CQ N2AVY CQ 2026-10-16 21:14:17 -9 dB

RX CQ N2AVY CQ 2026-10-16 21:14:27 -9 dB

RX CQ N2AVY CQ 2026-10-16 21:15:19 -8 dB

RX CQ N2AVY CQ 2026-10-16 21:16:14 -6 dB

RX DE N2AVY Q 2026-10-16 21:16:19 -8 dB

RX CQ N2AVY CQ 2026-10-16 21:16:26 -12 dB

RX CQ the out ... TY slice network DE N2AVY N2AVY check ... Please K# 2026-10-16 21:17:14 -6 dB

RX CQ the outer JTTY slice network DE N2AVY N2AVY check ins ...  E K# 2026-10-16 21:17:38 -4 dB

Thursday, October 15, 2026

Scoring Apple's Knowledge Navigator against Siri and ChatGPT

Earlier this year I posed the question Apple Knowledge Navigator - are we there yet? I was very pleased to see that SmartFriend™ Tony has done the hard work, now that xOS 27 is out with Siri AI, to test and find out.

Check out the Rambling Rows post "Scoring Apple's Knowledge Navigator against Siri and ChatGPT".

SiriAI is vastly better in many ways but, as a caller to my ABC Nightlife talkback spot last night observed, it's got worse at basic tasks like flipping lights and setting timers. I guess it's over-thinking simple tasks.

Tuesday, October 13, 2026

Binaural receivers can receive double sideband

Talented home brewer Stephen, VK2BLQ, mentioned that - unlike a direct conversion receiver - a binaural receiver can be used to listen to a double sideband transmitter. He sent some pictures and a sample recording.


I think this is promising in that it could be used to make a relatively simple transceiver comprising a double sideband transmitter and binaural receiver that could talk to another instance of the same design.

Here's Stephen's circuit notes:

 


Binaural receivers are useful for CW operators working with a busy part of the band as they spread signals out across the soundstage between your ears.

Sunday, October 11, 2026

A beautiful day for the Bendigo Hamfest

Richard, VK3LRJ, and I drove up to Bendigo for the excellent BAREC Hamfest. 



There was a good crowd and a decent amount of stuff on sale although I thought some of the prices were a bit optimistic. I bought an old Radio Shack condenser microphone and stand for $20. I had one back in the 80s and it was amazing quality at the time. This one didn't work when I got it home but the problem was that the body had turned so many times that the little power wire had broken. I fixed that but the mic doesn't sound good - it's had a hard life. 


Mostly it was a social event and great to catch up with a bunch of friends. Hugo VK3HUG, Colin VK3XW, Dallas VK3EB and Dave VK3ASE.


Great job by the organisers - it must be a big job putting something like this together.

Friday, October 09, 2026

Simple JTTY app for macOS

The JTTY application I made for Linux uses the QT6 framework. I could have built this for macOS but thought it would hurt my eyes so I've made a native macOS version.

There's a page for it here and the source code is available here.

It does depend on hamlib for rig control. I install it with homebrew. At the moment this is left as an exercise for the reader - as they say.

Thanks to Zero Retries (an excellent ham radio newsletter) for the warm mention in the latest edition.

"Macs, thanks to developers like VK3TPM are rapidly becoming “first-class citizens” in Amateur Radio!" - golly, I'm blushing!

Wednesday, October 07, 2026

Simple JTTY app for Linux

Stephen, VK2BLQ, and I have been playing with the new keyboard chat mode that's in the next release of WSJT-X. It seems to work very well but the user interface there is a bit daunting.

It occurs to me that it could be as simple to use as one of the phone instant messenger apps and so, with most of the work done by claude, I created JttyChat that you see on the right here.

Very simple. Choose Settings under File and configure audio to and from your transceiver and the hamlib configuration to control transmit.

There's a Frequency menu with the list of suggested upper sideband frequencies taken from WSJT-X.

We've been chatting in the middle of the day between Melbourne and Sydney without any trouble. I've also had reports from Michael VK2TMC.

The Linux app is packaged up as an AppImage. You download it, uncompress, set properties to make it executable, and it should just work. Because I'm using QT6 the AppImage file is rather large as it bundles all the dependencies including hamlib.

Download here.

Tech Talk on ABC Radio - what computer skills do we need in the future

What does it mean these days to say someone is 'good with computers'? It used to mean you knew your way around different programs, as well has knowing where to find things. 

AI is changing all of that with being 'user friendly' the whole AI schtick! 

Philip Clark is joined by Peter Marks, software developer and technology commentator from Access Informatics, with a look at what skills we will now need into the future. 

https://www.abc.net.au/listen/programs/nightlife/what-computer-skills-do-we-need-for-our-future/107235742

Tuesday, October 06, 2026

JTTY - new mode for keyboard short message chat on HF

There's an interesting new mode coming in WSJT-X 3.2 that support short text messages over HF with the weak-signal performance of FT8 but without the need for time synchronisation. 

At the time of writing it's not quite out yet but it's in the release candidate of WSJT-X 3.2 so it won't be long.

Stephen, VK2BLQ, drew my attention to it and we had a chat between Melbourne and Sydney (714km {for Americans, sorry, I don't know how many football fields that is}).

We both reduced power to 1W and were able to talk without any problem.

Leaving it running on 40m I can see quite a bit of activity (click the image at left to see more).

It's great to have modes that work without the need for second accurate time synchronisation as this open the door to portable operation without internet.

Recently I've also been playing with RattleGram which is a similar idea of short messages over radio. There are apps for Android and iOS. It seems to be mostly used on VHF/UHF FM radios and probably isn't ideal for HF conditions.

I do miss the days of PSK31 when I used to have fascinating long form text contacts.

Saturday, October 03, 2026

Phase nulling direction finder for fox hunting

Our club is holding a fox hunt in a few months. We have a few portable UHF beam antennas but I thought I'd try a simple design that uses the phase difference between two sense antennas. It's called a HANDI-Finder and was described in QST in 1993.

It uses a CD4047 oscillator divider to make a nice square wave and two diodes to mix the incoming signals. In my case the oscillator is at around 600Hz. When the phase is equal no tone is heard, otherwise you hear the tone in a receiver tuned to the frequency you're hunting. Here's the board:


To try it out I used a NanoVNA to generate a CW signal. Here's a demo:


It's available as a kit but they kindly make the circuit easy to find here. See https://handi-finder.com/ for full information.


Wednesday, September 30, 2026

Cleaned the work bench - why is it so damn hard?

My electronics work bench seems to descend in to entropy of its own accord faster than I can deal with it. Part of the problem is my short attention span - I start new projects before finishing the current ones.

I've had "clean shack bench" on my daily Reminder list, haunting me for months. Finally, over two days, I've taken drastic action.

Part of the problem is all those components, plugs, sockets, adapters, and bits of wire fall between not useful enough to have a proper box to go in and not useless enough to go in the bin.

My radio shack is quite small - probably a good thing - like a gas, junk expands to fill the available volume.

Cleaning up also triggers the mind and it's hard not to see something and start tinkering with it again.

Anyhow, I'm pleased that it looks good enough to work on again.



Tuesday, September 29, 2026

Built another NE602/LM386 Direct Conversion Receiver

In recent months I've been off in the land of software development and have been sadly ignoring the electronics workbench. To get me back in the mood I built another instance of the simple direct conversion receiver using two ICs described in Experimental Methods in RF Design.


NE602 mixer chips are a bit hard to find and the only ones I have are surface mount so you can see it on a little carrier board above. This design uses the on-chip oscillator. My tuning is extremely sensitive and will need some padding to give me band spread of just the 40m band. At this point I haven't tuned the front end and it's undoubtably way off so the receiver is quite deaf.


In the past I've built the, all discrete component, Soldersmoke Direct Conversion Receiver. That project is much more challenging than this little one but each has it's good ideas. I'm thinking of bringing over the PTO from Soldersmoke to this design just for fun (or perhaps over-thinking it and adding an Si5351 VFO!).

Here's the schematic.


(Click to enlarge).

Wednesday, September 23, 2026

Tech Talk on ABC Radio - AI dangers and opportunities

AI is moving beyond being a tool we use into systems that can make decisions and act autonomously. There are growing questions about how much control we have over them. 

Prime Minister Anthony Albanese in the US talking AI at the United Nations, and Nightlife looks at where this technology is heading and what it could mean for all of us. 

Peter Marks, software developer and technology commentator from Access Informatics, joined Philip Clark and listeners to Nightlife with the latest tech news and information. You can listen here.

Tuesday, September 22, 2026

Some terrific club events

I've been a bit quiet here on the blog recently, in part due to some excellent club events I've been involved with.

The Macedon Ranges Amateur Radio Club had a great meeting with two fascinating talks.

Beekeeping Meets Radio: Building a LoRa Network for the Apiary

Bouncing Light Off Clouds: 357 km Across Bass Strait on 730 nm

The Radio Amateurs Old Timers Club had:

Melbourne ATV Repeater VK3RTV A Brief History – the journey from Analogue AM to High Definition Television by Peter Cossins, VK3BFG.

We are lucky to have so many excellent speakers and events here in Victoria, Australia.

Friday, September 11, 2026

My longest distance FreeDV RADEV1 contact 14,342km

There have been reports recently of 20m openings so I left WSPR receiving and noticed the US was coming in. Switched over to FreeDV RADEV1 using my macOS version of the software called FreeDVNeo. Keyed down and on Reporter I could see that Dudley WA5QPZ in Austin Texas was receiving me. Not perfect copy, but not bad either.


Also, I'm running the release candidate of macOS 27 Golden Gate which will be out in a few days. So far it seems stable and fast.

Thursday, September 10, 2026

Robert Glasser - my 97.5 year old uncle, friend and radio amateur has died

Sad news that my 97+ year old uncle Robert Glasser, ex VK3QA & VK3DRG, has died after a fall at home. Robert was my first exposure to the ham radio hobby which has been a much loved part of my life. He had a tilt-over tower in the back yard (which he referred to as "my erection") with a beam for 20m when I was a child.


It's a credit to his kids, my cousins, Tracey and Paul, that Robert was able to stay at his home (with visiting carers) until just about the end. I know he appreciated that very much.

I would visit every few months when in Melbourne to catch up with friends and he was always excited to see me and hear about the evolution of ham radio technology. Once I dropped in on the way back from the Rosebud Radiofest and gave him a copy of the 1956 ARRL Handbook. He leafed through it and exclaimed "nothing's changed!". 


On another visit I brought along an IC-705 and showed him the waterfall display. He was impressed.

In later years he had a 2m radio but rarely was on air.



Robert, and his wife my dear aunt Peggy (who was an amazing person in her own right and the subject of this ABC program), were always kind and encouraging to me as a child and rather lost teenager. 


I asked Robert about his ham radio history during a visit in 2025.

Robert got his amateur licence when he was seventeen. You had to have morse code which he had known from childhood. The morse test “wasn’t too much of a problem for me”. 15 words per minute. People would buy tapes, punch tapes, to learn the code.

Callsign was W6HWA “Hard working American”

An early transceiver he owned was a Hallicrafters SR-150. He may have had a Collins KWM-1.

He had a three element beam for 20, 40 and 80m.

At Albany road he had a tilt-over tower with a beam that did 20 and 10m.

At seventeen, Robert lived in California.

Robert had contacts both locally and overseas. Mostly just calling CQ rather than regular nets.

I showed Robert a QMX transceiver. He was amazed at the size and the fact that it did multiple bands including 80m.

We discussed the difficulty of soldering to enamelled wire used to wind toroids.

We discussed QST magazine and the ARRL.

Robert moved to Australia in 1950. He rattled off a series of addresses in California where he had lived.

We discussed WSPR beaconing and low power operation. There had been a large solar flare in the last few days.

Robert commented “how times have changed!”.

Henry Radio was a shop he used.

Robert asked if the ham radio license is easy to get these days. We discussed the levels and the fact that tests are now multiple choice rather than essay.

“A lot of water has gone under the bridge”.

Robert’s dad was a real estate broker in California. Mainly houses. Beverly Hills. Beachside communities.

I mentioned the Palisades where there have been fires. Robert said he lived there at one point but got out in time. 

Robert’s older brother had married a girl from Melbourne and he came out to visit his brother. His brother was nine years older. He introduced Robert to Peg who he used to produce on radio. Robert just stayed in Australia after that. He can’t even recall going home for a visit (but he must have). 

“Time marches on, we’re all getting older.”

Farewell dear Robert. I will always remember you. Ex W6HWA , VK3QA & VK3DRG SK.


Wednesday, September 09, 2026

Tech Talk on ABC - with Cat Marks

Close readers of this blog will have noticed that I do a national radio talk about technology every fortnight but this week I was away on a hike. The program was looking around for someone to contribute the spot and went for my daughter Cat. 

It might be seen as nepotism except for the fact that she's much more qualified and certainly smarter than me. Here's her spot: 

The UK has just taken its first step into the Robotaxi era, with Wayve's self-driving cars now available to book through the Uber app; but there'll still be a licensed human driver in the front to take over if needed. 

Communications Minister Anika Wells has announced that the draft Digital Duty of Care law will be introduced into parliament this week, including a requirement that platforms offer the ability to 'opt-out' of their algorithms. What does this all mean?

Cat Marks, data scientist and Principal at Ember Advisors, joined Philip Clark and listeners to Nightlife with all the latest in tech news. Listen here: https://www.abc.net.au/listen/programs/nightlife/nightlife-tech-cat-marks/107131014

Tuesday, September 08, 2026

USB-C Power on Airbus

On the trip north to the recent walk I was lucky enough to fly on a couple of different recent Airbus planes in the Qantas fleet. The last one was an A220 which has this USB power port on the seat back:


Having bought, and tested, a few Chinese chargers, I'm a bit sceptical of the Watt claims on USB-C ports but I'm happy to report that Airbus is telling the truth. The macOS WhatCable tool is very handy.


Yep, 20V at 3A = 60W. Great stuff. 



The internet connection on the A220 tested at 18Mbps which is fine for general use. The plane I caught up to Sydney last week was a brand new Airbus A321-XLR and the internet speed was outstanding:


Malcolm Turnbul wouldn't need this speed but I thought it was great to see it.

Yuraygir coastal walk

I've just completed a beautiful 65km walk along the coast in Northern New South Wales.  The Yuraygir coastal walk started at Yamba and ended at Red Rock.

Along the way are stunning beaches, charming bush tracks, and a bit of rather challenging rock scrambles. To mix things up there's a couple of river crossings, two of which required boats to pick us up.

You really can't do this without support and in our case the trip was supported and guided by Marcus from Home Comforts Hiking. 

Walking south is certainly the best way to do it. We had the sun, and usually the wind at our backs.

I'd just left Drummond, Victoria, where it was 10C and I'd had the fire heating the house and arrived where it was 30C for much of the walk.

Happily I did not suffer from any blisters or other mishaps and felt faily fit probably due to my daily bush walks at home. Having said that, my feet were a bit sore at the end of each day but recovered by the morning.

Our guide Marcus did a wonderful job and the logistics all worked well bar a coffee shop that didn't open as advertised for breakfast one morning.




The walk is very well maintained by NSW Parks. We met a few of them along the way who were preparing for the visitors in the months ahead. 

There were frequent patches of no mobile coverage. I have an iPhone 17 Pro on Telstra and was pleased, for safety reasons, to see that it often showed "SAT" as the provider. When I tried to use data it shows this:


You can however send and receive iMessages. I tested this and they seemed to go through without delay.

Of course the high end iPhones also have satellite emergency contact which allows me to call for help in dire circumstances. I think these are fantastic features that help to justify the price of these phones.

The hike was a great experience and quite a contrast from my regular daily life in the cool bush by a warm radio.