Sunday, April 26, 2020

ARNSW Radio Experimenters Group meeting again via video

Since the COVID-19 isolation came in to effect, we've been having meetings of the ARNSW Radio Experimenters (Home Brew) group via a Skype meeting. Today we held the second "normal" meeting. (We've also been holding a few lunch meetings which are less structured and more social in nature.

Today we had Ali, Gary, John, Stephen, Colin, Kevin and Peter.

Peter, VK2EMU, was mentioned in dispatches on the most recent edition of the Soldersmoke podcast. He had been mentioned in the last episode as the builder of a power amplifier with 6 meters. A misunderstanding! It turns out that it's an amplifier for 40m that has six meters on the front panel. See below.


We had a pleasant chat about what each of us is up to that went for about an hour. I recorded the audio and you can hear it here.

I talked about a few topics of interest to home brewers including:

* QSO today interviewed VK3HN, Paul Taylor where he talks about home brew radios for SOTA.
* A recent podcast from Hackaday drew my attention to the fact that you can buy surface mount components in the form of a book. For example, here's one from Little Bird.

Today, I had the final radio operation from the current QTH. I listened to the Sunday broadcast on 20m with a small dipole in the front yard and participated in the call-back. Next stop is a small unit in Alphington in Victoria. It looks like there's a bit of a yard with a tree so I hope to throw some wire up shortly after moving in.

No comments:

Post a Comment